3 Ways to Fix iPhone Stuck on Apple Logo 2021 | How to Fix iPhone Stuck on Apple Logo

March 15, 2021

iPhone stuck on Apple Logo? fix it now without losing data using these 3 Methods.

👉🏾 Method 1. Hard Reboot to fix iPhone BootLoop

👉🏾 Method 2. Using Tenoshare Reiboot. http://bit.ly/Tenoshare-ReiBoot-iOS

👉🏾 Method 3. DFU Restore your iPhone.

the iPhone stuck on the Apple logo is one of the most common problems that people come up with while using an iPhone device. This can happen due to several reasons, but mostly it happens if there is a bug in your iPhone’s firmware. When this happens your phone gets stuck on the Apple logo. To solve this issue, three methods are commonly used. Below are the details about each.

➜ Method 1. Hard reboot
If your iPhone has stuck on the Apple logo, the first thing that you should try is to use the hard reboot method. Every iPhone device has its method for a hard reset. For iPhone 6, 6s, 6+, you need to press the home button, volume down, and power button at the same time. For iPhone 8 and above, you just need to press the volume down and the power button. For the iPhone X or later models, you need to press volume up then volume down then press and hold the power button.

➜ Method 2: Using Tenoshare ReiBoot.
Tenorshare Reiboot is one of the best solutions to fix this problem. This is an application that allows you to fix the iPhone stuck on the Apple logo without losing your data. Here is how to do it.
First, you will need to download the Tenorshare Reiboot. You can get it from here. http://bit.ly/Tenoshare-ReiBoot-iOS
Second, you will need to install it on your Mac, or windows computer. It is as simple as installing any other application on your PC or Mac.
After the installation completes, connect your iPhone with your PC or Mac.
Enter the recovery mode on your iPhone device. Each device has a different method.
Open Tenorshare Reiboot, it will show you the instructions manual for your iPhone to put it on recovery mode.
After that, you will see a screen that will give you two options, select the first one as it allows you to solve this problem without deleting your data.
It will ask you to download the latest firmware from iPhone, you can download it in the Tenorshare application.
After the download, begin the installation process. It will take a few minutes and your iPhone will be successfully fixed.
You can begin the normal iPhone setup procedure after that.

➜ Method 3: DFU Restore.
The third method requires the use of iTunes. It is known as the Device firmware update. You will need to connect your iPhone to your PC or Mac that has iTunes installed. After that, you can manually start the firmware update from there. It will take a few minutes to fix this problem.

Conclusion:
If your iPhone keeps showing the Apple logo and turning off, it is stuck on the boot-loop. It is a very common problem on iPhone devices that can be solved with the help of these three methods. This problem happens if your iOS has some bugs in it. To remove this bug, you will need to update your firmware. But mostly during this process, data is lost. To prevent this data loss, you can use the Tenorshare Reiboot as it allows you to keep your data and update your firmware as well and fix the iPhone stuck on the Apple logo problem as well.

If this video helped you by any means, then please SHARE it on your Social Media accounts. SHARING is always FREE. it doesn’t cost anything.
thanks.

Watch my other video too!

✿ Top 5 FREE Video Editing Software of all Time