CCTV Camera Installation with NVR | IP Camera, Hikvision NVR & PoE Switch Complete full Installation

35 thoughts on “CCTV Camera Installation with NVR | IP Camera, Hikvision NVR & PoE Switch Complete full Installation”

• NVR should be connected to PoE switch UPLINK port and PoE switch should be connected to router also via UPLINK port. Thank you.

• Bro your password is incorrect

• ❤

• Zingat

• so clear and easily understandable!

• Probably, camera & NVR are good, unfortunately, its app, hikconnect, is not a good one

• Very nice and detailed video guide, but is this can be used with holowitz camera?

• this learning was very useful for me, thank you so much

• sorry maybe i missed it, but what is the purpose of connecting the access point? to be able to connect wirelessly later? because you were connected through ethernet cable through out the process.

• what is the black piece connected to your laptop

• hi sir

• Wheres the link to down load the SADP

• This is the guide that I'm looking for 😊

• Can I use nvr without poe switch

• Sir, if power goes off and comes back, will the total systems operation resume or someone's presence is required to restart the whole system..

• Good video.

• ❤❤❤❤

• Do I actually need a POE Switch or can I use a regular switch and a 12V power supply for each camera install?

• If I wanted to create my owm security camera mobile app and connect it to a door camera as well as other security cameras, where should I buy the cameras with no brand name on them?

• Love it all specific explanation ….

• Love it all specific explanation ….

• thanks

• Thank you 🙏🏻

• nice vids bai, thanks for sharing – salam

• Wow good

• Hello please I've got few questions

  1. Can someone use phone to configure ip cameras?

  2. When configuring the camera which password did you key in? Is it the password set up at the initial time while setting up the NVR?

  3. You said we have to ensure that the adding method is manual now how many adding methods does it have? Then is there any implications if someone didn't select manual method when adding the ip cameras?

  Thank you 🙏

• Why didn't you plug those cameras straight to the NVR instead? Why you need to waste a PoE router?

• Can i just use the NVR's LANPORT instead of POE CISCO Switch?

• Can you please share which software you use to create this video. Thank you in advance.

• really super . worth it

• What a good instructor I wish I knew this page earlier these practical's(real labs) are good for us leaners

• You don't need a Switch PoE, you can connect directly from the router to the NVR and from the NVR to the cameras.

• Does SAPA software still work with any brand of camera?

• Hi sir can I use this to tapo wifi cameras?

• There are 2 cables attached to the camera. 1 is ethernet, what is the other 1?

Comments are closed.