BDCOM Switch Networking: Setting up IP Address
BDCOM Switch Networking: Setting up IP Address
To set a VLAN and IP address:
Type the command ‘config’ and press enter. The CLI field should read ‘switch_config#’
Type the command ‘interface vlan1’ and press enter
Type the command ‘ip 192.168.1.1 255.255.255.0’ and press enter. We used 192.168.1.1 and 255.255.255.0 as our default IP address and subnet mask – you can change this information based on your network range
Type the command ‘no shutdown’ and press enter
Type the command ‘exit’ and press enter
Type the command ‘exit’ and press enter
Your OLT should be on the main level of the OLT CLI interface
#bdcommunity #switch #olt #howto #information #LuminaTech
ip address
