Cisco CCNA Packet Tracer Ultimate labs: DHCP Server Lab 1: Can you complete the lab?
Packet Tracer file: (PT version 7.1): https://goo.gl/d5sgt9
Get the Packet Tracer course for only $10 by clicking here: https://goo.gl/vikgKN
Get my ICND1 and ICND2 courses for $10 here: https://goo.gl/XR1xm9 (you will get ICND2 as a free bonus when you buy the ICND1 course).
#CCNA #PacketTracer #CCENT
This is a DHCP Lab.
Labs! Labs! And more Labs! Get the hands on experience to pass your CCNA exam!
Make sure you are ready to pass the CCNA exam! Prepare practically for the Cisco CCNA certification which is the most in-demand networking certification in the world today! Make sure you can pass the Cisco CCNA Routing and Switch 200-125 exam!
This course tests your knowledge of CCNA topics with practical, hands on labs. Labs include both configuration as well as troubleshooting labs.
Ask yourself these questions:
– Are you ready and prepared for the labs in the CCNA exam?
– Are you able to troubleshoot Cisco networks?
– Are you confident with your ability to configure networks as required by Cisco to pass the CCNA?
Answer:
This course helps you prepare for the exam and gain the confidence to pass the exam!
There are many topologies and many labs in this course!
Transcription:
In this a lab we’ve been asked to configure DHCP on Router1 as follows. The excluded address range is going to be from 10.1.1.1 to 10.1.1.100
The pool name is going to be PC, the network to use is 10.1.1.10/24 and the default gateway for the DHCP pool will be Router 1 and the DNS server for the DHCP pool will be Router 1.
You should configure this network and test it. Make sure that PC 0 gets an IP address from the router and is able to ping the loopback of Router 1. So ensure that things actually work so you can configure the router. Download the packet tracer file and see if you can configure the router per these requirements.
In the next video I’m going to show you how to do this but try it first and see if you can do it yourself….
ccna
