Como configurar Inter-VLAN Routing (Router On Stick) – Cisco CCNA
#CCNA #CISCO #RouterOnStick #Seven Networks
En este video vamos a enseñarles la configuración de inter-vlan routing (router-on-a-stick) como solución a un enrutamiento entre diferentes VLANs.
——-COMANDOS SWITCH——-
!
interface Ethernet0/0
switchport trunk encapsulation dot1q
switchport mode trunk
!
interface Ethernet1/0
switchport access vlan 20
switchport mode access
duplex auto
!
interface Ethernet2/0
switchport access vlan 30
switchport mode access
duplex auto
!
——COMANDO ROUTER——
!
interface FastEthernet0/0
no ip address
duplex full
!
interface FastEthernet0/0.20
encapsulation dot1Q 20
ip address 192.168.20.1 255.255.255.0
!
interface FastEthernet0/0.30
encapsulation dot1Q 30
ip address 192.168.30.1 255.255.255.0
!
Deja tu LIKE Y COMPARTE el video. RUMBO AL CCNA
ccna
