How to AC750 Setup using mywifiext with BB
Netgear Range Extender AC750 Setup with ethernet cable
If you’re looking to get your AC750 up and running as quickly as possible, one of the best ways to do it is with an ethernet cable. Here’s a quick guide on how to set it up.
Connect an Ethernet cable to the Netgear router hosting the network. Connect the other end to a computer.
Input “www.routerlogin.net” or “192.168.1.1” — without quotes — into the address bar of a Web browser. Press “Enter.”
Enter your administrative credentials into the User Name and Password fields. Click “OK” to log in.
Select “Wireless Settings” from under Setup. Write down the network name, mode and channel.
Choose “WEP” from under Security Options. Enter a security key into the appropriate fields and then click “Apply.”
Select “Wireless Repeating Function” from under Advanced. Write down the MAC address of the device.
Disconnect the Ethernet cable from the router and connect it to the Netgear device to be used as a repeater. Confirm the router is not connected to the modem.
Log on to the router using the same instructions as in Steps 2 and 3. Configure the router so that its service set identifier, mode, channel and security settings match that of the network.
Click “Router Status” and write down the IP address, found under LAN Port.
Click “Wireless Repeating Function.” Write down the MAC address shown and then select “Enable Wireless Repeating Function.” Choose “Wireless Repeater” from the options.
Enter the IP address of the router, recorded in Step 9, into the applicable field and then deselect “Disable Wireless Client Association.”
Enter the MAC address of the network router into the Base Station MAC Address field. Click “Apply” to turn the router into a repeater.
Disconnect the Ethernet cable from the repeater. Sign on to the network and then access router setup.
Go to the Wireless Repeating Function page and then select “Enable Wireless Repeater.” Click “Wireless Base Station.”
Deselect “Disable Wireless Client Association” and then enter the MAC address of the repeater into the applicable field.
Click “Apply” to finish configuring the repeating function on the routers.
Get Instant Solution to all Problems ⌛
► Call Netgear Support: – (880) 770 2231 (Toll-Free Number)
This Video is the work of the Netgear support team.
DISCLAIMER: Please don’t go out of your way to or hate on anyone I talk about in my videos; this channel is to educate people and I usually focus on education users through technology.
#NetgearExtender #Extendersuppport #hp #Setup #Guide #techsupport
Copyright Disclaimer Under Section 107 of the Copyright Act 1976, allowance is made for fair use, for purposes such as criticism, comment, news reporting, teaching, scholarship, and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational, or personal use tips the balance in favor of fair use.
Thanks For Watching.
mac address
