how to change the IP address of a modem PTCL Router || Update Your PTCL Router IP Address Easily!
Changing the IP address of a PTCL (Pakistan Telecommunication Company Limited) router involves accessing the router’s web interface and making the necessary adjustments. Here’s a detailed step-by-step guide:
Step 1: Connect to the Router
1. Wired or Wireless Connection : Ensure your computer is connected to the PTCL router either via an Ethernet cable or wirelessly.
Step 2: Access the Router’s Web Interface
1. Open a Web Browser : Launch your preferred web browser (Chrome, Firefox, Edge, etc.).
2. Enter the Router’s IP Address : In the address bar, type the router’s default IP address. For PTCL routers, this is typically `192.168.1.1` or `192.168.10.1`, and press Enter.
### Step 3: Log In to the Router
1. Enter Login Credentials : You will be prompted to enter the router’s username and password.
– The default username is usually `admin`.
– The default password is often `admin` or `password`. If these defaults do not work, check your router’s manual or any documentation provided by PTCL. If you’ve changed the credentials and forgotten them, you may need to reset the router to factory settings.
Step 4: Navigate to the IP Address Settings
1. Access LAN Settings: Once logged in, look for the section related to network settings. This can usually be found under headings like `Network`, `LAN`, or `Advanced Settings`.
2. Change the Router IP Address: Locate the field for the router’s IP address. It might be labeled as `LAN IP Address` or something similar.
Step 5: Modify the IP Address
1. Enter the New IP Address : Replace the existing IP address with the desired new IP address. Ensure the new IP address is within the same subnet range as your network. For example, if your current IP is `192.168.1.1`, you might change it to `192.168.1.2`.
2. Subnet Mask: Usually, the subnet mask remains `255.255.255.0`. Only change this if you know what you’re doing.
Step 6: Save the Changes
1. Apply/Save Settings: After entering the new IP address, look for an `Apply`, `Save`, or `Submit` button to confirm the changes. The router will likely reboot to apply the new settings.
Step 7: Reconnect to the Router
1. Reconnect with New IP: Once the router reboots, your connection may drop. Use the new IP address to reconnect to the router’s web interface. Open a web browser and enter the new IP address in the address bar.
Troubleshooting Tips
– Incorrect IP Address: If you accidentally set an incorrect IP address and can’t access the router, you may need to reset the router to factory settings. Usually, this involves pressing and holding a reset button on the router for about 10-15 seconds.
-Documentation : Refer to the PTCL router manual for specific instructions, as the interface and options may vary depending on the router model.
By following these steps, you should be able to successfully change the IP address of your PTCL router.
ipv4
