How to configure the Mitel 5360 IP Phone for use at home or office.
How to configure the ICP IP Address and the TFTP SVR Address in the Mitel 5360 IP Phone.
These settings can be found by accessing the network parameters after putting the Mitel 5360 into configuration mode. Adjusting these settings will enable the Mitel 5360 to be used at home or at the office as long as the main server is configured.
00:00:00 Intro
00:00:04 Plug the Ethernet Cable In
00:00:12 Put phone in programming mode
00:00:27 Access the Modify ipv4 Parameters
00:00:58 Add the ICP IP and TFTP SVR Addresses
00:02:15 Remove the ICP IP and TFTP SVR Addresses
ipv4
