How to repair Print Spooler in Windows 10

In this post, we will show you how to repair Print Spooler Service in Windows 10. Print Spooler (executable file) is a built-in feature of Windows 10 that handles print jobs. Most of the time, the service works just fine. But, sometimes users face many problems like Print Spooler service is not running, Print Spooler service error 1068, Print Spooler error 0x800706B9, etc. If you are also facing some kind of issue with it, then this post might help you repair Print Spooler in Windows 10 with some fixes.

Repair Print Spooler in Windows 10

Earlier, there was a Microsoft Fix It tool for repairing Print Spooler, but that tool was discontinued. Therefore, you can try some manual fixes covered in this post to repair it.

1. Enable or turn on Print Spooler
2. Restart Print Spooler service using Task Manager
3. Reset and Clear Print Spooler using Command Prompt
4. Add required binary files for Print Spooler
5. Make sure Print Spooler dependencies are running
6. Using Registry Editor.

1] Enable or turn on Print Spooler

If the Print Spooler service is not running at all, then it might be possible that the service is disabled or turned off, or stopped. So, first, you need to turn on or enable Print Spooler service using Windows Services Manager or some other ways. Once the service is started successfully, you might be able to use it without any issue.

2] Restart Print Spooler service using Task Manager

If this service is already running and still you are facing some kind of issue, then a simple restart for this service might help you fix the issue you’re facing. You can restart Print Spooler using Task Manager. The steps are as follows:

1. Open Task Manager using the Search box or in any other preferred way
2. Click on the More details option to access all the tabs
3. Switch to the Services tab
4. Scroll down and select Spooler service
5. Right-click on Spooler
6. Click on the Restart option.

3] Reset and Clear Print Spooler using Command Prompt

If there is some print job(s) stuck in the print queue, then also it is the possibility that Print Spooler is not working as it should. So, it is good to reset and clear Print Spooler. This can be done using Command Prompt. Here are the steps:

Open Command Prompt as administrator

Execute the following command:

net stop spooler

This will stop the Print Spooler service which is handy so that the reset process can take place successfully

Next, Run the following command:

DEL /F /S /Q %systemroot%System32spoolPRINTERS*

This will begin and complete the reset process and remove stuck jobs (*.shd and *.spl files)

Finally, execute this command. This will start the Print Spooler again.

net start spooler

This should solve your problem.

You can also delete SHD and SPL files manually. For this, access the PRINTERS folder. Its path is here:

C:WindowsSystem32spoolPRINTERS

Look for those files and delete them manually.

4] Add required binary files for Print Spooler

The required DLL and EXE files for Print Spooler must be present to make it work properly. These files are spoolss.dll, win32spl.dll, spoolss.exe, and localspl.dll. All these files are present in the System32 folder (C > Windows > System32). Check if all such files are there or not. If not, you need to fix the missing DLL files and EXE files for Print Spooler.

After that, Print Spooler should work fine.

5] Make sure Print Spooler dependencies are running

There are many services that depend on other services or system components to work properly. The same goes for Print Spooler also. So, you need to find all such dependencies and run or start them if not already.

To do this, you can open Windows Service Manager, and then find the Dependencies for Print Spooler by accessing its properties window. After that, run all such dependency services using the same Windows Service Manager.

6] Using Registry Editor

This option might is a bit complicated. Registry Editor stores the important entries (keys and values) for system files and other applications. There are Print Spooler Registry entries also present that have to be there to make it work correctly. If those files are not present, it can cause issues that Print Spooler is not responding properly. So, check such entries and create Registry keys and values if such entries don’t exist.

Before trying any of the below-mentioned options, take a backup of Registry so that you can restore it later if needed.

1. Add standard print monitor keys and their values
2. Add winprint Registry key and its String Value
3. Delete any fake path for SpoolDirectory String Value of your printer,

1] Add standard print monitor keys and their values

Carefully follow all the steps:

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlPrintMonitors

• Create Local Port, Standard TCP/IP Port, and USB Monitor registry keys under Monitors key
• Create Driver name String Value in all the above-mentioned registry keys
• Double-click on Driver value for Local Port key
• Add localspl.dll in the Value data box
• Press OK
• Double-click on Drive String value for Standard TCP/IP Port key
• Add tcpmon.dll in Value data box
• Press OK
• Double-click on Driver value for USB Monitor key
• Add usbmon.dll in Value data box
• Press OK.

2] Add winprint Registry key and its String Value

• Open Windows 10 Registry Editor
• Access Print Processors key. The path is:

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlPrintEnvironmentsWindows x64Print Processors

• Create a winprint Registry key under the Print Processors key
• Create Driver name String Value on the right-hand side
• Double-click on Drive String Value
• Add winprint.dll entry in the Value data field
• Press OK.

3] Delete any fake path for SpoolDirectory String Value of your printer

This option might help if you have connected multiple printers with your computer. Some infectious files or malware might have added some fake path in the Value data field of SpoolDirectory String Value of your printer present in the Registry Editor. That might be causing an obstacle in using Print Spooler perfectly. So, deleting that fake path might help. The steps are:

• Open Registry Editor
• Access Printers Here is the path:

HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlPrintPrinters

• Under Printers, click on the Printer name that is causing the problem
• On the right-hand side, scroll down and double-click on the SpoolDirectory String value
• Clear or remove all the entries present in the Value data field
• Press the OK button.

Print Spooler Repair tool

There used to be a Fix-It as well as a Print Spooler Cleanup Diagnostic Tool from Microsoft but that is now not available. The Printer Troubleshooter is the closest you have.

You may try this free 3rd-party tool called Fix Print Spooler from sordum.org and see if that helps you.

Hope something from these fixes helps you. If it does not, you may need to consider Reset This PC option.