Manual IP Address Configuration for End Devices | IPv4 Addresses
Manual IP Address Configuration for End Devices | IPv4 Addresses
========= Content Of The Video===========
⏱️TIMESTAMPS⏱️
00:00 CCIE Academy Intro
00:47 End Devices
00:55 IPv4 vs IPv6
01:20 Manual IP Address Configuration for End Devices
01:36 End Devices in Network
02:28 Configuring IP Addresses
02:47 DHCP
03:19 Configure an IPv4 Addrss on a Windows Host
03:34 How to Find my IP Address
03:53 ipconfig
04:13 NCPA.CPL
05:54 Assign Manual IPv4 Address
06:22 Default Gateway
07:22 IPv6 Addrssing and configuration options are similar to IPv4
07:53 DNS Server
08:30 Packet Tracer
09:03 Configure Manula IP Address in Cisco Packet Tracer
09:30 Class C Subnet Mask
09:49 Check IP Configuration in Cisco Packet Tracer
10:00 How to Check Connectivity
=============== Links=======================
Switch Virtual Interface for Inter Vlan Routing (SVI)
https://www.youtube.com/watch?v=QBgK2…
Surface Web Vs Deep Web Vs Dark Web
https://www.youtube.com/watch?v=ulDgs…
What is Hacking and Types of Hacking
https://www.youtube.com/watch?v=YPgEb…
Important Tech-Related Lectures
https://www.youtube.com/watch?v=2kHIc…
Cisco CCNA 200-301 NetAcad Account Topic With Explanation
https://www.youtube.com/watch?v=-a8Cc…
Complete CCNA 200-125 180 Video Lectures Free
https://www.youtube.com/watch?v=JUV-A…
This Video Link
Manual IP Address Configuration for End Devices | IPv4 Addresses
https://www.youtube.com/watch?v=NOWHbPXyz5M
Configure IP Addressing
Manual IP Address Configuration for End Devices
Much like you need your friends’ telephone numbers to text or call them, end devices in your network need an IP address so that they can communicate with other devices on your network. In this topic, you will implement basic connectivity by configuring IP addressing on switches and PCs.
IPv4 address information can be entered into end devices manually or automatically using Dynamic Host Configuration Protocol (DHCP).
To manually configure an IPv4 address on a Windows host, open the Control Panel – Network Sharing Center – Change adapter settings and choose the adapter. Next right-click and select Properties to display the Local Area Connection Properties, as shown in the figure.
example of the Ethernet properties Windows dialog box for a connection using a Realtek PCIe GBE family controller with Internet Protocol Version 4 (TCP/IPv4) highlighted
Highlight Internet Protocol Version 4 (TCP/IPv4) and click Properties to open the Internet Protocol Version 4 (TCP/IPv4) Properties window, shown in the figure. Configure the IPv4 address and subnet mask information, and default gateway.
Note: IPv6 addressing and configuration options are similar to IPv4.
example of the TCP/IPv4 Windows dialog box manually set to use the IP address 192.168.1.10, subnet mask of 255.255.2550, and default gateway of 192.168.1.1
Note: The DNS server addresses are the IPv4 and IPv6 addresses of the Domain Name System (DNS) servers, which are used to translate IP addresses to domain names, such as www.cisco.com.
Share, Support, and Subscribe
Subscribe: https://www.youtube.com/ccieacademy
Website: https://www.ccieacademy.com.pk
Facebook page: https://www.facebook.com/CCIENCA
All about CCIE Academy urdu videos: https://www.youtube.com/ccieacademy
About: All about CCIE Academy urdu and Hindi is a YouTube Channel, where you will find Computer Network related and technological videos in Urdu, New Video is Posted Everyday Insh Allah!
https://www.youtube.com/ccieacademy
ip address
