RIPv2 LAB-9 | Part-11 | CCNP | CCNA | Mukesh sir

February 16, 2021

This is a 11th Video of RIP.
In this Video We Discuss LAB of RIPv2 Protocol.

1- Triggered Update in RIPv2
2- PPP Encapsulation in RIPv2

Points are covered in this RIPv2 lab-8 :-

1- Default Routing
2- About Redistribution with RIP
3- Conditional Default routing in RIPv2
4- Route map configuration in RIPv2

Points are covered in this RIPv2 lab-7 :-

1- Use of Extended ACL with Distribute-list
2- About Prefix List
3- About VLSM Prefixes

Points are covered in this lab-6 :-
1- Use of Distribution -list
2- Router Filtering
3- Use of standard ACL in route filtering
4- About Wild-card mask

Points are covered in this lab-5 :-
1- Static Neighbor
2- Split Horizon
3- Passive interface
4- Hub and Spoke topology
5- Unicast update.

Point covered in this LAB-4 :-
1- Path manipulation through AD value
2- Router filtering through AD value
3- About offset list

RIPv2 LAB-3 Video point covered :-

Points Covered in LAB-3 :-
About Matric
About Offset-list
About Path Manipulation
Route Filtering

Points Covered in LAB-2 :-

RIPv2 Routing
About prefix updates
About Flash update
About rip packet size
About Split Horizon
Configuration of Authentication both type text and md5

Points Covered in LAB-1 :-

RIPv2 Routing
Contagious and Discontiguous N/W
Show Multicast add and UDP port
Show update packet information
Show max prefixes in packet is 25

Points Covered in Theory part-2 :-

RIPv2 Introduction & Loop prevention Mechanism
What Is loop prevention Mechanism in RIPv2
Difference between ripv1 and ripv2
Route Poisoning
Poisson Reverse
Split – Horizon
About Hold down timer

Points Covered in Theory part-1 :-

What Is RIPv2
Difference between ripv1 and ripv2
About Periodic update
About Flash Update
Split – Horizon
About Hold down timer
About Summarization
About Authentication