Un|Cut: How to set up MikroTik virtual router (CHR) on Hetzner Cloud

https://youtu.be/oCGXbVLXYO0

In this video you will learn how to set up a MikroTik virtual router on the German cloud provider Hetzner.

Use this command to write the CHR raw disk image to your boot drive:
“curl -L URL_OBTAINED_FROM_WEBSITE | funzip | dd of=/dev/sda bs=1M”

Sources used to create this video:
– https://mikrotik.com/download
– https://wiki.mikrotik.com/wiki/Manual:CHR_Hetzner
– https://community.hetzner.com/tutorials/mikrotik-chr-basic-setup/
– https://datatracker.ietf.org/doc/html/rfc1918
– https://help.mikrotik.com/docs/display/ROS/Upgrading+to+v7
– https://docs.hetzner.com/cloud/networks/server-configuration/

Timestamps:
00:00 Introduction
00:36 Create private networks
01:26 Add the MikroTik server
03:27 Install MikroTik
05:13 Perform initial login; change admin password
05:43 Set up DHCP clients for private networks
05:55 Set the correct MTU
06:24 Verify DHCP is working
06:48 Set up second private server to verify connectivity
07:19 Ping private server through MikroTik

source

by heidbrink(dot)dev

linux dhcp server